Comprehensive Fridge Spare Parts Table
Comprehensive Fridge Spare Parts Table
| Part Name | Purpose | Estimated Price (Ksh) |
|---|---|---|
| Compressor | The heart of the refrigeration system that compresses refrigerant gas and pumps it through the cooling system to remove heat from the interior | 8,000 – 25,000 |
| Thermostat | Controls and regulates the internal temperature by turning the compressor on and off to maintain desired cooling levels | 1,500 – 4,500 |
| Evaporator Fan Motor | Circulates cold air throughout the refrigerator and freezer compartments to ensure even cooling distribution | 2,500 – 6,000 |
| Condenser Fan Motor | Cools the compressor and condenser coils by blowing air across them, helping dissipate heat from the refrigeration system | 2,000 – 5,500 |
| Start Relay | Provides the initial electrical boost needed to start the compressor motor and protects it from electrical overload | 500 – 1,500 |
| Overload Protector | Safety device that automatically shuts off the compressor if it overheats or draws excessive current, preventing motor damage | 400 – 1,200 |
| Capacitor | Stores and releases electrical energy to help start and run the compressor and fan motors efficiently | 600 – 2,000 |
| Door Gasket/Seal | Rubber seal around the door that creates an airtight closure to prevent cold air from escaping and warm air from entering | 2,000 – 6,500 |
| Defrost Timer | Controls the automatic defrost cycle by periodically switching the refrigerator from cooling mode to defrost mode | 1,500 – 3,500 |
| Defrost Heater | Melts frost buildup on the evaporator coils during the defrost cycle to maintain efficient cooling performance | 2,000 – 5,000 |
| Defrost Thermostat | Monitors evaporator temperature during defrost cycle and turns off the heater when ice has melted to prevent overheating | 800 – 2,500 |
| Temperature Sensor/Thermistor | Electronic sensor that monitors internal temperature and sends signals to the control board for precise temperature regulation | 1,000 – 3,000 |
| Control Board/PCB | Electronic brain of the refrigerator that controls all functions including temperature, defrost cycles, and displays | 4,000 – 12,000 |
| Water Inlet Valve | Controls water flow to the ice maker and water dispenser, opening and closing based on electrical signals | 2,000 – 5,000 |
| Ice Maker Assembly | Complete unit that produces, harvests, and stores ice cubes automatically in the freezer compartment | 5,000 – 15,000 |
| Water Filter | Removes impurities, chlorine, and contaminants from water supply before it reaches the dispenser or ice maker | 1,500 – 4,500 |
| Water Dispenser Valve/Tap | Mechanical valve that releases filtered water when activated, allowing users to dispense drinking water | 1,200 – 3,500 |
| Drain Pan | Collects condensation and defrost water from the evaporator, located beneath the refrigerator | 800 – 2,500 |
| Drain Tube/Hose | Channels defrost water from the evaporator to the drain pan for evaporation | 400 – 1,500 |
| Evaporator Coils | Cold coils where refrigerant absorbs heat from the interior, creating the cooling effect inside the fridge | 3,500 – 10,000 |
| Condenser Coils | Hot coils located outside the refrigerated space where heat is released from the refrigerant to the surrounding air | 3,000 – 9,000 |
| Light Bulb/LED Assembly | Illuminates the interior compartments when the door is opened for visibility | 200 – 1,500 |
| Door Switch | Detects when the door is opened or closed, controlling interior lights and triggering alarms if door is left open | 500 – 1,800 |
| Door Hinge | Mechanical hardware that allows the door to open and close smoothly while supporting its weight | 800 – 2,500 |
| Door Handle | External grip for opening and closing the refrigerator door, available in various styles and finishes | 1,000 – 4,000 |
| Shelves (Glass/Wire) | Adjustable platforms for organizing and storing food items inside the refrigerator compartment | 1,500 – 5,000 |
| Crisper Drawer | Humidity-controlled drawer designed to keep fruits and vegetables fresh longer by maintaining optimal moisture levels | 2,000 – 6,000 |
| Freezer Basket/Drawer | Organizational compartment in the freezer section for storing frozen items in an accessible manner | 1,500 – 4,500 |
| Door Bins/Shelves | Storage compartments attached to the inside of the door for bottles, condiments, and small items | 800 – 3,000 |
| Butter Compartment | Small covered container in the door designed to keep butter at optimal spreading temperature | 500 – 1,500 |
| Egg Tray | Specialized holder with individual slots for storing eggs safely and preventing breakage | 300 – 1,000 |
| Deli Drawer | Temperature-controlled drawer that maintains slightly warmer temperature than main compartment for deli meats and cheeses | 2,500 – 6,500 |
| Temperature Display Panel | Digital or analog display that shows current temperature settings and allows user adjustments | 2,000 – 6,000 |
| Alarm System | Audible alert system that warns when door is left open too long or temperature rises above safe levels | 1,500 – 4,000 |
| Refrigerant (Gas) | Chemical substance that circulates through the cooling system, absorbing heat inside and releasing it outside | 2,000 – 6,000 |
| Compressor Mounting Rubber | Vibration-dampening rubber mounts that reduce noise and prevent compressor damage from excessive movement | 400 – 1,200 |
| Fan Blade | Plastic or metal blade attached to fan motors that moves air throughout the refrigerator compartments | 600 – 2,000 |
| Insulation Material | Foam insulation between inner and outer walls that maintains temperature efficiency and reduces energy consumption | 1,500 – 4,000 |
| Mullion Heater | Small heating element in the divider between fridge and freezer that prevents condensation and frost buildup | 1,200 – 3,500 |
| Water Line/Tubing | Flexible tube that carries water from the supply to the ice maker and dispenser | 500 – 2,000 |
| Water Reservoir/Tank | Storage tank that holds filtered water ready for dispensing, keeping it cold and accessible | 2,500 – 6,000 |
| Drip Tray (Dispenser) | Small tray beneath the water/ice dispenser that catches drips and overflows | 400 – 1,500 |
| Leveling Feet | Adjustable feet at the base of the refrigerator that allow proper leveling on uneven floors | 300 – 1,000 |
| Wheels/Casters | Rotating wheels that allow the refrigerator to be moved easily for cleaning or repositioning | 600 – 2,000 |
| Door Cam | Mechanical component that helps the door close automatically and maintains proper seal alignment | 500 – 1,800 |
| Damper Control | Regulates cold air flow from freezer to refrigerator section to maintain proper temperature balance | 1,500 – 4,000 |
| Air Filter | Removes odors and keeps air fresh inside the refrigerator by filtering circulating air through activated carbon | 800 – 2,500 |
| Humidity Control System | Controls moisture levels in crisper drawers to optimize freshness of fruits and vegetables | 1,200 – 3,500 |
| Freezer Door Seal | Specialized gasket for the freezer compartment that withstands lower temperatures and prevents frost buildup | 1,800 – 5,500 |
| Kick Plate/Toe Grille | Decorative panel at the base that covers mechanical components and provides ventilation | 800 – 2,500 |
| Main Power Cord | Electrical cable that connects the refrigerator to the power outlet, rated for appliance amperage | 600 – 2,000 |
| Door Closer Mechanism | Spring or pneumatic device that ensures the door closes gently and completely after being opened | 1,000 – 3,000 |
| Ice Bucket/Container | Removable container that stores ice produced by the ice maker until needed | 1,200 – 3,500 |
| Ice Chute Door | Small flap in the dispenser area that opens to allow ice to pass through when dispensing | 800 – 2,500 |
| Water Filter Housing | Protective casing that holds the water filter securely and directs water flow through it | 1,000 – 3,000 |
| Display Control Panel | Electronic interface with buttons or touchscreen that allows users to adjust settings and view information | 3,000 – 10,000 |
| Interior Back Panel | Protective cover inside the fridge that conceals evaporator coils and provides smooth interior surface | 1,500 – 4,000 |
| Adjustable Shelf Brackets | Hardware that allows shelves to be repositioned at different heights for flexible storage options | 400 – 1,500 |
| Wine Rack | Specialized holder designed to store wine bottles horizontally at optimal angle | 1,000 – 3,500 |
| Snack Drawer | Small pull-out drawer for easy access to frequently used items like snacks and drinks | 1,500 – 4,000 |
| Freezer Shelf | Stationary or removable platform in the freezer for organizing frozen foods | 1,200 – 3,500 |
| Door Alarm Switch | Sensor that triggers alarm when door remains open beyond preset time limit | 600 – 2,000 |
| Sabbath Mode Module | Special control component that allows the refrigerator to operate in compliance with religious observances | 2,000 – 5,000 |
| Fresh Food Damper | Controls air flow between compartments to maintain optimal temperature and humidity | 1,500 – 4,000 |
| Convertible Drawer Control | Allows user to adjust temperature of a specific drawer for different food storage needs | 2,000 – 5,500 |
| UV Light System | Ultraviolet light that kills bacteria and eliminates odors inside the refrigerator | 2,500 – 7,000 |
Notes:
- Prices are estimates and vary based on refrigerator brand, model, and supplier
- Installation costs are not included in the part prices
- Genuine manufacturer parts typically cost more than compatible aftermarket parts
- Prices may fluctuate based on market conditions and availability
- Some parts are model-specific and may require special ordering
This comprehensive table covers the major spare parts found in modern refrigerators, from basic mechanical components to advanced electronic systems.
